Flex-a-lite 220 Puller Fan User Manual download pdf

Through Core Mounting Instructions

(SEE DIAGRAM “A”)

1.Position the electric fan against the back of the radia-

tor, and mark the holes for mounting.(

Some applica-

tions may have A/C condensers and/or transmission

coolers on the front of the radiator. Additional adjust-

ments or modifications may be necessary for installa-

tion

)

2. Rotate fan blades to make sure they are free of ob-

structions.

3. With a small phillips screwdriver pass through the

marked holes, carefully spread the fins to allow easy

passage for the nylon bolts (

4 for the single fan unit, 4

for the double fan unit

). Pass the bolts through the shroud holes

then twist the bolts through the radiator.

4. Slide the rubber washer, then the nylon washer onto the nylon bolt and finger tighten nylon

nuts until snug.

5. Once again, rotate fan blades to insure that they are free of obstruction.

Radiator Support Channel Or Frame Installation

(SEE DIAGRAM “B”)

1. Attach frame mounting brackets to fan using

nylon bolts, cut them to 1",

use nylon nuts to secure.

2. Position fan to desired location, mark holes on

radiator channels or frame.

3. Rotate fan blades to insure that they are free

of obstruction.

4. On the marked hole locations drill 13/64" holes.

5. Secure the fan to radiator using the provided

1/4" x 1" self tapping screws.

6. Check fan rotation.

Nylon

Washer

Diagram A

110&120 210&220

Puller Fans

Installation Instructions

Nylon Bolt

rev. 05-18-05 99876 Page 1 of 3

Model 110 - Single fan w/ thermostatic

control & A/C relay

Model 120 - Single fan w/o thermostatic

control & A/C relay

Model 210 - Dual fan w/ thermostatic

control & A/C relay

Model 220 - Dual fan w/o thermostatic

control & A/C relay

Rubber Disk

Spacer

Nylon Nut

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Through Core Mounting Instructions(SEE DIAGRAM “A”) 1.Position the electric fan against the back of the radia-tor, and mark the holes for mounting.(So

Page 2 - Fan Wiring Instructions

Fan Wiring InstructionsStep 1: Locate mounting point for controlLocate a mounting point for control near inlet side of radiator. Control needs to be

Page 3 - NOTE: To prevent

rev. 05-18-05 99876 Page 3 of 3Step 8: (Optional) For manual switch operation, use Flex-a-lite p/n 31148. Connect the switch asshown o

Comments to this Manuals

No comments

Flex-a-lite 220 Puller Fan User Manual

Browse online or download User Manual for For the car Flex-a-lite 220 Puller Fan. Flex-a-Lite 220 Puller Fan User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Flex-a-lite 220 Puller Fan